Description: A luxurious colored cement mortar with high resistance to harsh
weather conditions. It only needs to be mixed with water on site before application
General Cement Graviato is ideal for interior and exterior surfaces. General Cement
Graviato gives a smooth surface in the case of finishing by traditional manual
methods using a trowel or a rough surface in the case of implementation using
mechanical spray machines in order to increase production rates and maintain color
consistency.
Composition : Graviato is manufactured using the finest raw materials that
include high-stress binders and carefully selected graded fillers and special additives
to improve (operability – water retention capacity – adhesion strength – color
stability when exposed to ultraviolet rays and harsh weather factors)
Specifications : General Cement Graviato is manufactured according to the
Egyptian specification and the product is approved by the Housing Research Center
Technical information:
Color
is available in many colors
Application
thickness 2.5 – 3 mm
Density
before mixing approximately 1.65 kg / liter
Operating time approximately 30 minutes at 25 m
Packaging: General Cement Graviato is available in 50 kg bags Color Thickness
Application Density – Before Mixing Operating Time
Mixing ratio: About 8 ± 0.25 liters of water per 40 kg bag 2
Indicative consumption rate: About 2.75–3.25 kg/m Graviato surface when
applied manually
About 3.5–5 kg/m Rough surface when applied mechanically by spraying
(Indicative consumption rate may vary according to surface condition)
Properties:• Pre-mixed, easy-to-apply mixture that only needs to be mixed with water before
use
• Manufactured using carefully selected raw materials that meet the highest quality
control standards
• Manufactured automatically using precise component ratios due to the factory’s
control over production processes, which ensures complete homogeneity of the
mixture
• Available in many fixed and attractive colors
• Gives an attractive and modern final decorative finish
• Easy to mix and efficient to operate
• Easy to apply mortar, which reduces waste and increases implementation rates
• Superior protection against salting compared to traditional mortars
• Strength High adhesion to various cement surfaces
• Allows surfaces to breathe through it
• High resistance to different climatic conditions
Surface preparation: It is recommended to use General Cement Grafiato on
walls and cement surfaces. When applied to new plaster, the new plaster must be
left (at least 14 days) before implementation. Surfaces are treated for any problems
that lead to water penetration inside them. Surfaces to be prepared must be strong
and free of dust, oils or any foreign materials that prevent adhesion. The surface is
sprayed with water immediately before applying the General Cement Graviato,
taking care not to leave any excess water on the surface.
Validity: 12 months from the date of production stated on the package, provided
that it is stored in a dry and covered place and that the correct storage methods are
followed.
Safety and Security: When applying the product, gloves and goggles must be
used. In case the product comes into contact with the skin or eyes, wash with clean
water