Description : Internal gypsum putty consisting of gypsum materials treated with
specially selected chemical additives to give high hardness and strength to adhere
to cement plaster surfaces, smooth concrete and stone surfaces. It can also be used
as a leveling layer up to 5 mm. It is applied with a metal trowel. It is characterized
by its durability and strong adhesion to surfaces and is not affected by ultraviolet
rays. It is extremely flexible in spreading. It provides superior protection for
concrete surfaces from carbon dioxide and salts, with a high concentration in the
binding material.
Features:
– It can be used on white plaster without a preparatory face.
– It has the ability to fill gaps and cracks due to the product not shrinking after
drying.
It is not affected by weather factors, environmentally friendly and free of harmful
substances.
Technical properties: At a temperature of 25
Drying time
Mixing water ratio
2-3 hours
50% of the package weight
How to use:
– Add an amount of water about 50% of the product in a suitable container, then
add the product in batches with stirring, then
Use the remaining 10% of the water to reach the appropriate consistency.
Operating time:
– The product can be operated for two hours of mixing time and decreases with
increasing temperature. It is preferable to mix quantities
Suitable for operation.
Indicative consumption rate: approximately 2-3 m3/kg and the rate may vary
depending on the condition of the surface on which the product will be applied